Concrete Patio Do It Yourself

Looking for a concrete patio do it yourself ideas? Here you will find concrete patio ideas, and concrete patio molds and instructions on how to do these projects. However, there are more then a few steps involved when it comes to concrete patio do it your self-projects. You first have to mix, then pour and finish the concrete. This can be challenging, but with the right instruction it can be done without contractor.

However, there are a few things to think about before starting to mix your concrete patio.

• How to mix: by hand or with the help of a mixer?

• Site prep: getting the area for your patio ready to take the concrete

• Pouring the Concrete

Here is a general outline of how a concrete patio do it yourself project should be done:

• Decide on your concrete mix:

Mixing concrete is the most important part of your project. With a bad concrete mix, your patio will not be the proper foundation you need it to be. Three ingredients, largely determine density and strength of concrete. These ingredients are water, cement, and aggregate. The goal is to have a final product that is easy to place, strong enough for the specified application, long lasting, and able to take and hold your decorative choices.

Weather you are using a concrete mixer or are mixing the concrete by hand, there is a subtle technique to mixing good concrete. Try to mix the dry ingredients first. Slowly add water until the concrete becomes workable. The mixture can be modified depending on the aggregate used to make the concrete more or less workable. The mix should not be too hard or too wet.

• Site Preparation

Site preparation can vary depending on what part of the country you live in. If you live in an area where you are affected by winter you will need to replace the soil directly under the area with a compacted layer of crushed stone. You must do this because it improves

• Drainage

• Life of your concrete patio

• Reduces the chance of cracking

If you do this correctly, this will ensure that the life of your concrete patio will be a long one. Remember, concrete patio do it yourself projects must be done correctly, or the results can be not only a waste of time, but also a waste of money.

• Pour the concrete

Once your site is ready to go, you can now pour your concrete. This step can be tricky. If done correctly, you should be left with a level, and uniform surface that is easy to work with. To achieve these qualities, you will probably need to work the concrete into the site with a rake or a trowel. This will ensure that the concrete is compact, and ready to be left to dry. Flexibility is a key factor when lying concrete, as dehydrated mixtures are difficult to place, so make sure that you have adequate water levels to make the concrete flexible enough and strong enough.

With a little imagination, some hard work and a good concrete mix, you will be able to complete you concrete patio do it yourself project. Now, all the remains is to let your concrete dry, and decide what type of concrete patio furniture to decorate your new patio with!

Return to Homepage from Concrete Patio do it yourself?